Linksys Voice Over IP Phone Adapter with 2 Phone Ports.
MODEL- PAP2T-NA VENDOR- LINKSYS FEATURES- Internet Phone Adapter with 2 Ports for Voice-over-IP Feature-Rich VoIP Service through your High-Speed Internet Connection! The Linksys Internet Phone Adapter enables high-quality feature-rich VoIP (voice over IP) service through your broadband Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone ports to connect analog phones or use one of the ports for a fax machine. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and a reliable fax connection, even while using the Internet at the same time. With Internet telephony, along with low domestic and international phone rates, an impressive array of special telephone features are available. Choose your preferred free local dialing area code, regardless of where you live. Or add a virtual telephone number in any area code, forwarded to your Internet phone. You can even add a toll-free number. The Linksys Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephony service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, and much more. Let the Linksys Internet Phone Adapter enhance your existing Internet connection with a high-quality high-value VoIP service. Includes PAP2T Phone Adapter Unit, Power Adapter, RJ-45 Ethernet Cable, Quick Installation Guide. * Enables feature-rich telephone service over your broadband Internet connection. * Two standard telephone ports for analog phones or use one of the ports for a fax machine, each with an independent phone number. * High quality, clear sounding voice service simultaneous with Internet use. * Two voice ports (RJ-11) for analog phones or Fax machines * Impedance Agnostics - 8 Configurable Settings * Call Waiting, Cancel Call Waiting, Call Waiting Caller ID * Caller ID with Name/Number (Multi-national Variants) * Caller ID Blocking * Call Forwarding: No answer, Busy, All * Do Not Disturb * Call Transfer * Three-way Conference Calling with Local Mixing * Message Waiting Indication - Visual and Tone Based * Call Return * Call Back on Busy * Call Blocking with Toll Restriction * Delayed Disconnect * Distinctive Ringing - Calling and Called Number * Off-hook Warning Tone * Selective/Anonymous Call Rejection * Hot line and Warm Line Calling * Speed Dialing of 8 Numbers/Addresses * Music on Hold -- SPECIFICATIONs ------------------------------------ DATA NETWORKING- MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883). ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) ICMP - Internet Control Message Protocol (RFC792) TCP - Transmission Control Protocol (RFC793) UDP - User Datagram Protocol (RFC768) RTP - Real Time Protocol (RFC 1889) (RFC 1890) RTCP - Real Time Control Protocol (RFC 1889) DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349) SNTP - Simple Network Time Protocol (RFC 2030) VOICE GATEWAY- SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264). SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT (incl. STUN). Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP. Codec Name Assignment VOICE ALGORITHMS- G.711 (A-law and -law) G.726 (16/24/32/40 kbps) G.729 A G.723.1 (6.3 kbps, 5.3 kbps) Dynamic Payload Adjustable Audio Frames per Packet FAX CAPABILITY- Fax Tone Detection Pass-Through Fax Pass-Though - Using G.711 DTMF: In-band & Out-of-band (RFC 2833) (SIP Info) Flexible Dial Plan Support with Interdigit Timers and IP Dialing. Call Progress Tone Generation Jitter Buffer - Adaptive Frame Loss Concealment Full Duplex Audio Echo Cancellation (G.165/G.168) VAD - Voice Activity Detection with Silence Suppression Attenuation/Gain Adjustments Flash Hook Timer MWI - Message Waiting Indicator Tones VMWI - via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions SECURITY - Password Protected System Reset to Factory Default Password Protected Admin and User Access Authority Provisioning/Configuration/Authentication: - HTTPS with Factory Installed Client Certificate HTTP Digest - Encrypted Authentication via MD5 (RFC 1321) Up to 256-bit AES Encryption PROVISIONING, ADMINISTRATION & MAINTENANCE- Web Browser Administration & Configuration via Integral Web Server. Telephone Key Pad Configuration with Interactive Voice Prompts. Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP Asynchronous Notification of Upgrade Availability via NOTIFY Non-intrusive, In-Service Upgrades Report Generation & Event Logging Stats in BYE Message Syslog & Debug Server Records - Per Line Configurable CONNECTORS - (1) 10BaseT/RJ45 Ethernet port (IEEE 802.3) (2) RJ-11 FXS Phone ports (for analog circuit telephone device), (Tip/Ring). SUBSCRIBER LINE INTERFACE CIRCUIT- (SLIC) Ring Voltage : 40-55 VRMS Configurable Ring Frequency : 10 Hz - 40 Hz Ring Waveform : Trapezoidal and Sinusoidal Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current : 25 mA min Terminating Impedance : 8 Configurable Settings including North America 600 ohms, European CTR21. INDICATORS - LEDs for Power, Ethernet, Phone1, Phone2 APPROVALS - FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick POWER SOURCE - DC Input Voltage: +5 VDC at 2.0 A Max. Power Consumption: 5 Watts Switching Type (100-240v) Automatic Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord. DIMENSIONS - 3.98" x 3.98" x 1.10" WT.- 5.4 oz. www.linksys.com